RE: How to capture the Image Through QXR panal

in

Dear sir,

We are using QXR  panal to Capture the Image. QXR  having Two Signals  as Follows

1.VCC_EXT

2.Exposure .these signals Indicate the ON and OFF time of the X-rays

In QXvue Software there is  a Mode Called Exposure Mode. when i need to Irradiate the X-rays, After entering this mode ?

are you Giving any Indication to User to Irradiate X-rays?

What are the Kv ,mA, mS ranges of  the QXR?

Thanks&Regards,

Prakash

 

 

 

Capturing X-ray Images using QXVue

Submitted by Will on Tue, 2009-07-21 16:02.

Prakash,

Please see the videos on our site for how to do an exposure in QXVue.

Those two leads (VCC_ext and expose) must be attached to your generator, so that they signal when the x-ray exposure occurs. In the X-caliber retrofit, we include an interface board that will generate that signal for you, no matter what x-ray generator you are using.

The QXR ccds can be used for any medical or veterinary x-ray technique. The equivalent speed of the system will vary depending on which version you have.