Dose Area Product Measuring system -Vacu DAP

The VacuDAP measuring system is used to measure the Dose Area Product (DAP).

The modular VacuDAP dose area product measuring system offers various ionization chambers and configurations for a wide range of X-ray equipment. The VacuDAP measuring system is used to measure the Dose Area Product (DAP). This value is most suitable to indicate the patient dose in X-ray diagnostics.

The transparent ionization chambers fit easily into the accessory rails at the collimator. Adapted circular ionization chambers are used for complete integration into C-arm machines. All devices are equipped with a serial interface for transfer data files to a printer or a PC. Different printer, adapter and PC software is available as an accessory.

The dose area product measuring chamber contains the complete measurement electronics and has a serial RS485 interface. The measuring chamber can be controlled and operated through an ASCII protocol. The measuring results are shown on the control panel of the X-ray generator or a separate display unit. An RS485 – RS232 converter is available to connect the chamber to any host computer.

Contact Us

Limit 500 Characters

Select list(s) to subscribe to

By submitting this form, you are consenting to receive marketing emails from: ExamVue Digital X-Ray, 3555 Veterans Memorial Hwy, Ronkonkoma, NY, 11779, You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact