Project Description

ExamvueDR 1012c Wireless

Quadcel is the name for the four core technologies that improve the performance of the ExamvueDR 1417 Wireless Detector.

Technology

Quadcel is the name for the four core technologies that improve the performance of the ExamvueDR 1417 Wireless Detector.

a. In house CsI:TI            

High performance & Low dose

  • Advanced in-house technology which is cultivated in long history and experience.
  • X-ray Scintillator produced by the optimum process control for Flat panel Detector.
  • The technology enables high performance & low dose.
Superstructure (Top View)

b. Direct CsI:TI vapor deposit           

High performance & Low dose

  • Fine Csl:Tl Structure on Photodiode/TFT board manufactured by advanced process control.
  • The technology enables high performance and low dose

c.Reflective layer coating           

High Sensitivity & Low dose

  • 1.8 times sensitivity against Non-Reflective layer coating
  • The technology enables high sensitivity & low dose
  • Quadcel technology packaged in a cassette-sized wireless FPD with excellent image quality.
  • Automatic switching between wireless mode and tethered mode.
  • Short cycle time (less than 1O sec.) supports improved diagnostic efficiency.

d.Moisture -proof sealing       

Long life & Stable high performance

  • High reliability is achieved by advanced sealing.
  • Compact and lightweight for easy handling.
  • Compact, lightweight battery charger permits more flexible installation locations.
Application General Radiography
TFT TFT array + Photo Diode (a-Si)
Conversion Screen Csl:TI (direct vapor deposition) + reflective coating
Active area 14x 17 inch (35x 43cm)
Active Pixel Matrix 2,448 x 2,984( 7.3 million pixels)
Pixel Pitch 143um
A/D Conversion 16bits
Image Resolution 3.7LP/mm
Image output time  3 seconds for full image
Cycle Time ( min/Std) 6 second (min.)/1minutes (Std)

9 second (with image lag reduction)

MTF (2LP/mm)
(2.0 Lp/mm, 70 kVp, 1×1): 30 % Typ.
DQE 15 x 18 x 0.6 in  (384 x 460 x 15mm
Weight 6.6lbs (3kg)
Dimensions 15 x 18 x 0.6 in  (384 x 460 x 15mm
Certification  IEC60601-1,IEC60601-1-2
MDD93/42/EEC (CE marking)

Subscribe to our newsletter

Enjoy. Follow, Like, and Share.